_GOTOBOTTOM
Armor/AFV
For discussions on tanks, artillery, jeeps, etc.
The New Release You Didn't Even Know You Want
18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Tuesday, September 22, 2015 - 11:38 PM UTC
Recently there was some speculation about a kit's release not being the one I expected. (I'm assured BOTH are still in the works) The photo below ain't one of them, but just for fun, it is of a different one I helped with that is coming. Who knows their engines?

HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Tuesday, September 22, 2015 - 11:47 PM UTC
Looks like it could be a Cummins engine to me. MaxxPro maybe???
18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Tuesday, September 22, 2015 - 11:55 PM UTC
Great guess!



But no, this photo is from the Maxx Pro, and clearly differs. I've already ridden that bull in two rodeos. Time for something new.
jwest21
Visit this Community
Pennsylvania, United States
Joined: October 16, 2006
KitMaker: 3,374 posts
Armorama: 3,126 posts
Posted: Tuesday, September 22, 2015 - 11:59 PM UTC
Caiman?
18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Wednesday, September 23, 2015 - 01:21 AM UTC
You peeked in my Photobucket album, didn't you?

But no. Althought now that you mention it, I did do a very comprehensive walk around it (the fourth for that vehicle if you include one in Iraq) and I'd sure hate to think I was wasting my time.
Trisaw
Visit this Community
California, United States
Joined: December 24, 2002
KitMaker: 4,105 posts
Armorama: 2,492 posts
Posted: Wednesday, September 23, 2015 - 01:49 AM UTC
Since I see black mounting brackets, I'm going to take a wild guess and say Chenowth SEAL DPV, which could also explain the inner rust if the engine is exposed.
sabreuk
Visit this Community
England - East Anglia, United Kingdom
Joined: May 31, 2015
KitMaker: 79 posts
Armorama: 52 posts
Posted: Wednesday, September 23, 2015 - 01:54 AM UTC
looks very simialr to an internatioanl amx or euro spec navistar husky with an uprated fan housing but the alt and serptine belt are are the same as the husky layout however the navistar doesnt have an open engine pan like in the pic unless the belly plate is off. maybe a cougar mrap.
rogerjo1
Visit this Community
Västra Götaland, Sweden
Joined: November 12, 2010
KitMaker: 950 posts
Armorama: 905 posts
Posted: Wednesday, September 23, 2015 - 02:20 AM UTC
I think it can be a Husky, i can nothing about engine but i know you mention once that it maybe come a kit of the Husky
that would be great if it is that....
18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Wednesday, September 23, 2015 - 02:50 AM UTC
Not a Husky either, although no less than THREE manufacturers have expressed interest. Two have my measurements. I had completely forgotten about that one.
sabreuk
Visit this Community
England - East Anglia, United Kingdom
Joined: May 31, 2015
KitMaker: 79 posts
Armorama: 52 posts
Posted: Wednesday, September 23, 2015 - 03:46 AM UTC
oshkosh mrap (m atv)

or m1114 uparmoured humvee
knewton
Visit this Community
New Zealand
Joined: June 19, 2013
KitMaker: 1,217 posts
Armorama: 1,092 posts
Posted: Wednesday, September 23, 2015 - 04:27 AM UTC
My 2005 Toyota Carolla? Almost a direct match!
jekrott
Visit this Community
Connecticut, United States
Joined: March 25, 2006
KitMaker: 485 posts
Armorama: 353 posts
Posted: Wednesday, September 23, 2015 - 04:41 AM UTC
Is it British or American 😀
amoz02t
#192
Visit this Community
Kentucky, United States
Joined: November 25, 2009
KitMaker: 1,383 posts
Armorama: 1,281 posts
Posted: Wednesday, September 23, 2015 - 05:43 AM UTC
YOU are a tease 18B
35th-scale
Visit this Community
Kildare, Ireland
Joined: November 21, 2007
KitMaker: 3,212 posts
Armorama: 2,807 posts
Posted: Wednesday, September 23, 2015 - 05:15 PM UTC

Quoted Text

Since I see black mounting brackets, I'm going to take a wild guess and say Chenowth SEAL DPV, which could also explain the inner rust if the engine is exposed.



Mr Bravo didn't deny this one! That would be good news if it was true.....
18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Wednesday, September 23, 2015 - 06:37 PM UTC
While I did do a full walk around and measurements of that one last summer (the Holy Grail as someone out it) not on the list yet. A few have expressed interest, but resin is not the right medium for it. We'll what happens. See related post from me a few months ago.
rogerjo1
Visit this Community
Västra Götaland, Sweden
Joined: November 12, 2010
KitMaker: 950 posts
Armorama: 905 posts
Posted: Wednesday, September 23, 2015 - 07:33 PM UTC

Quoted Text

Not a Husky either, although no less than THREE manufacturers have expressed interest. Two have my measurements. I had completely forgotten about that one.



Ok, but then i hope it's a Mrap atleast.. Any kind of mrap
SSGToms
Visit this Community
Connecticut, United States
Joined: April 02, 2005
KitMaker: 3,608 posts
Armorama: 3,092 posts
Posted: Wednesday, September 23, 2015 - 09:50 PM UTC
I think it's the new Oshkosh MATV. It would be funny if a model was released before the real thing entered service!
Trisaw
Visit this Community
California, United States
Joined: December 24, 2002
KitMaker: 4,105 posts
Armorama: 2,492 posts
Posted: Thursday, September 24, 2015 - 06:09 AM UTC

Quoted Text

I think it's the new Oshkosh MATV. It would be funny if a model was released before the real thing entered service!



Here's the Oshkosh JLTV engine...

http://truckyeah.jalopnik.com/the-hummer-replacing-oshkosh-jltv-will-run-a-gm-duramax-1727303709

skyshark
Visit this Community
North Carolina, United States
Joined: November 16, 2005
KitMaker: 703 posts
Armorama: 499 posts
Posted: Thursday, September 24, 2015 - 07:01 PM UTC
Its a M916 Tractor Truck. Or A SEE engineer vehicle.

Robert I remember you asking if anyone had a spare 1/32 Freightliner hood.

If this is it hopefully more modern trailers are coming soon with?!

Still waiting on the FASSV M992


18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Thursday, September 24, 2015 - 09:03 PM UTC
I can only apologize for the FAASV delay, although it's out of my control. I sometimes am quite surprised about the timing of a release myself, as in the case of Hisham's announcement this morning. I will say that that particualr release gives me hope on the FAASV though. They've only had the reference material for what, two and a half, three years now?
skyshark
Visit this Community
North Carolina, United States
Joined: November 16, 2005
KitMaker: 703 posts
Armorama: 499 posts
Posted: Friday, September 25, 2015 - 05:59 PM UTC
Robert what about the pics you show. Did I get it rite. It the M916 rite?! Or the SEE. Which one.
18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Friday, September 25, 2015 - 07:38 PM UTC
Sorry, neither. Remember, it's something you DIDN'T know you wanted. You guys are all guessing about stuff you DO want. (Of course those are coming in hot and heavy now as well)
didgeboy
Visit this Community
Washington, United States
Joined: September 21, 2010
KitMaker: 1,846 posts
Armorama: 1,509 posts
Posted: Friday, September 25, 2015 - 08:56 PM UTC
Wheeled or tracked?
Trisaw
Visit this Community
California, United States
Joined: December 24, 2002
KitMaker: 4,105 posts
Armorama: 2,492 posts
Posted: Friday, September 25, 2015 - 10:18 PM UTC

Quoted Text

Sorry, neither. Remember, it's something you DIDN'T know you wanted. You guys are all guessing about stuff you DO want. (Of course those are coming in hot and heavy now as well)



Heck, I want a USMC Mercedes G IFAV or M1161 "Growler." Since it has green fan blades, I take it it's Army. Could it be the John Deere M-Gator?
Broiler
Visit this Community
Maryland, United States
Joined: February 23, 2006
KitMaker: 84 posts
Armorama: 81 posts
Posted: Saturday, September 26, 2015 - 02:26 AM UTC
I'm guessing it's some kind of civilian cargo truck. Probably something common to the Middle East or Afghanistan. I've never seen these cargo trucks make the list of "most requested" kits, but it would make sense to offer these kinds of trucks with so many modern military convoy escort/route clearance vehicles available (Husky, JERRV, etc.).

BK
 _GOTOTOP