Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Saturday, March 02, 2019 - 12:49 PM UTC
So, as per previous post, I have a back up to try and meet deadline - the Plus Model 1/35th Sd Anh 32 Ammo trailer. The moulding on the lower tool box brackets was damaged but I thought I could get away with it, but looking at the pics, they clearly need to be replaced.
Rather than have to make up ammo to fit the very small holes in the brass etch, I decided to button her up
Replaced the Notek convoy light with a better detailed Dragon one. I also replaced the Shovel with one from the spares box and used an Aber clamp and some etch fret section for the clamp and shovel holder.
On the Bench:
Dust, styrene scraps, paint splotches and tears.
Sofiya, Bulgaria
Joined: November 26, 2017
KitMaker: 393 posts
Armorama: 369 posts
Posted: Saturday, March 02, 2019 - 08:25 PM UTC
Peter, I see that not only do I have a resin problem. But it looks wonderful. After painting it will be even better. Good luck.
Kalin
![KitMaker Network Subscriber](../images/global/km_subscriber_small.gif)
#490
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Saturday, March 02, 2019 - 09:41 PM UTC
I hear you, gentlemen!
That's why they say resin is not for the faint-hearted...
![](../modules/SquawkBox/images/smilies/wink.gif)
I've built several kits since my first resin build (PlusModel's Pavesi/Resin I Campaign), but honestly-I have yet to find another resin kit of such quality (maybe the Steyr 640, I received last week?!?).
Splendid job on the Sd.Ah.,Peter!
Sofiya, Bulgaria
Joined: November 26, 2017
KitMaker: 393 posts
Armorama: 369 posts
Posted: Sunday, March 03, 2019 - 03:29 AM UTC
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Sunday, March 03, 2019 - 07:36 AM UTC
On the Bench:
Dust, styrene scraps, paint splotches and tears.
Sofiya, Bulgaria
Joined: November 26, 2017
KitMaker: 393 posts
Armorama: 369 posts
Posted: Monday, March 04, 2019 - 05:38 AM UTC
![KitMaker Network Subscriber](../images/global/km_subscriber_small.gif)
#490
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Monday, March 04, 2019 - 08:12 AM UTC
Wow!!!
Kalin-you just showed us you are right-it is difficult to compare to professionals!
Uusimaa, Finland
Joined: October 01, 2016
KitMaker: 514 posts
Armorama: 171 posts
Posted: Thursday, March 07, 2019 - 04:44 AM UTC
Thanks, Angel.
Basic painting done, I'll paint driver figure next and then do weathering:
![](../../i.imgur.com/fZgy5Qx.jpg)
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Thursday, March 07, 2019 - 08:25 AM UTC
Beautifully done Kalin. I love it. Thanks for joining in.
Pasi, a very interesting choice. It is really coming to life now.
On the Bench:
Dust, styrene scraps, paint splotches and tears.
Sofiya, Bulgaria
Joined: November 26, 2017
KitMaker: 393 posts
Armorama: 369 posts
Posted: Thursday, March 07, 2019 - 09:17 AM UTC
Angel.Peter, thanks! My pleasure!
Kalin
![KitMaker Network Subscriber](../images/global/km_subscriber_small.gif)
#298
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
Armorama: 665 posts
Posted: Thursday, March 07, 2019 - 08:15 PM UTC
Late Start, Accurate Armour 1/35 German Experimental Jagdpanzer E25.
![](../../farm8.staticflickr.com/7812/46592688884_b35efeae0d_n.jpg)
![KitMaker Network Subscriber](../images/global/km_subscriber_small.gif)
#490
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Thursday, March 07, 2019 - 09:19 PM UTC
You're welcome, Pasi!
Both the quality of the kit and your build are really top notch!
Watching your Sank(r)a built was my pleasure too,Kalin!
Wish you a good start,Lap Man!
Sure this will be another stunner of yours!
Gentlemen,
We have 23 days left.
Should anyone need bit more time to finish a participating build, please let me know so I can apply for dead line extension.
I also remind those of you, who already have finished builds but did not upload at least 2 pictures to Campaigns gallery, to do so(R&R say: no pictures in gallery-no ribbon)!
Gallery is here:
https://gallery.kitmaker.net/showgallery.php/cat/31419Good luck!
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Monday, March 11, 2019 - 10:16 PM UTC
Replaced the broken Bracing at the bottom of the front and rear of the box.
Have primed and pre-shaded since these pics.
Removed the mud flaps since then too, as I could find no pics with them this long. Several pics show none, so I have chosen to go that way.
I don't suppose anyone has a pic of the connector for the wiring to fit the socket on the vehicle??
On the Bench:
Dust, styrene scraps, paint splotches and tears.
Sofiya, Bulgaria
Joined: November 26, 2017
KitMaker: 393 posts
Armorama: 369 posts
Posted: Tuesday, March 12, 2019 - 01:36 AM UTC
Great work, Peter!
I expect to see him ready. With the tug!
Kalin
![KitMaker Network Subscriber](../images/global/km_subscriber_small.gif)
#490
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Tuesday, March 12, 2019 - 02:16 AM UTC
Nice looking trailer,Peter!
Hope to see soon pictures of it finished in the Gallery,
Uusimaa, Finland
Joined: October 01, 2016
KitMaker: 514 posts
Armorama: 171 posts
Posted: Tuesday, March 12, 2019 - 06:17 AM UTC
Thanks Peter and Angel.
Finished painting driver. Not perfect, but fun to paint anyway.
![](../../i.imgur.com/SjueP5x.jpg)
There are couple of shiny spots that will be fixed with matt varnish.
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Tuesday, March 12, 2019 - 08:00 PM UTC
On the Bench:
Dust, styrene scraps, paint splotches and tears.
![KitMaker Network Subscriber](../images/global/km_subscriber_small.gif)
#041
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 10,069 posts
Armorama: 4,677 posts
Posted: Sunday, March 17, 2019 - 06:46 AM UTC
Here is my finished build. Quite a nice beast.
I will try to take better pictures when the weather clears and I can take pictures outside.
![](../../i.imgur.com/lLNmf24.jpg)
![](../../i.imgur.com/h0m7rcB.jpg)
Campaign'oholic - 252+ campaigns completed
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Sunday, March 17, 2019 - 09:28 PM UTC
Excellent Jesper. The weathering on the paint work is fantastic.
On the Bench:
Dust, styrene scraps, paint splotches and tears.
![KitMaker Network Subscriber](../images/global/km_subscriber_small.gif)
#490
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Sunday, March 17, 2019 - 10:43 PM UTC
Two excellent pieces(beasts) of art, Pasi and Jesper!
Well done!
Uusimaa, Finland
Joined: October 01, 2016
KitMaker: 514 posts
Armorama: 171 posts
Posted: Saturday, March 23, 2019 - 02:20 AM UTC
And also this is now done:
![](../../i.imgur.com/13JwrRo.jpg)
Thanks for a fun campaign. Two more photos are in
gallery.
![KitMaker Network Subscriber](../images/global/km_subscriber_small.gif)
#490
Sofiya, Bulgaria
Joined: September 22, 2016
KitMaker: 1,432 posts
Armorama: 1,390 posts
Posted: Saturday, March 23, 2019 - 03:43 AM UTC
Congrats on crossing the finish line, Pasi!
Thanks for your fruitfull participation,
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Saturday, March 23, 2019 - 08:41 AM UTC
Very Nicely Done Pasi. Quite a striking piece overall. It really grabs your attention.
On the Bench:
Dust, styrene scraps, paint splotches and tears.
Queensland, Australia
Joined: August 06, 2005
KitMaker: 3,353 posts
Armorama: 3,121 posts
Posted: Saturday, March 23, 2019 - 08:46 AM UTC
Well, at least I finished the Sd Anh 32. Puma is still being glowered at...
100% acrylic paints. Tamiya Base colours, Shovel and weathering with various Vallejo paints.
...and MIG will tell you, you can't weather with acrylics…
On the Bench:
Dust, styrene scraps, paint splotches and tears.
![KitMaker Network Subscriber](../images/global/km_subscriber_small.gif)
#298
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
Armorama: 665 posts
Posted: Sunday, March 24, 2019 - 07:22 PM UTC