135
Monday, July 20, 2015 - 02:39 PM UTC
J’s Work have released two more offerings in their camouflage mask set for the King Tiger and Panzer IV. If you have difficulty with adding camouflage to your models then this product may be of interest.
These masks from J’s Work can make the addition of quite complicated camouflage patterns easier to achieve. I suppose you could cut these masks out yourself, but it is far easier to utilise sets such as these to obtain your desired finish.

PPA5135 - Airbrush CAMO-MASK for 1/35 King Tiger “OCTOPUS” Camouflage Scheme
PPA5136 - Airbrush CAMO-MASK for 1/35 Pz.Kpfw. IV Ausf. H/J Camouflage Scheme 1
Click Star to Rate
5 readers have rated this story.
Get a daily email with links to all our latest news, reviews, and features.

Comments

Very useful for painting.
JUL 20, 2015 - 08:35 PM
I have tried a couple sets, while nicely done, they are difficult to line up and don't take into consideration the surface details on the vehicle.
JUL 20, 2015 - 08:37 PM
Nice! Blu tack could fill the gap or complex edges.
JUL 21, 2015 - 09:23 AM
would be good if we could get a picture of a model with these masks applied in order to form a good opinion
JUL 21, 2015 - 10:34 PM
I wonder if I've missed something here. "I suppose you could cut these masks out yourself" Well, yeah... I tried to enlarge the "User Guide" which doesn't enlarge well. I still can't tell if you cut these out or do the different sections peel apart? If you have to cut them apart, how does that differ from what I usually do? I usually enlarge the kit diagram on a photo copy machine, and cut out the sections as needed. The old Paladin kit is a perfect example.
JUL 21, 2015 - 10:44 PM
If the armor masks are like the planes ones, they are pre-cut.
JUL 21, 2015 - 11:54 PM
I used their 3-tone camo mask for Humvee and I was pretty satisfied with it. The sheet is pre-cut into shapes that accurately portrayed camo shapes I found in field manuals. The Humvee does not feature many surface details so I had no problems in applying the masks to the vehicle. For hard edge camo, I would say J's work masks are very nice and well worth the money. Mario
JUL 22, 2015 - 12:02 AM
THIS STORY HAS BEEN READ 6,494 TIMES.
ADVERTISEMENT

Photos
Click image to enlarge
  • move
  • move
Js Work ReviewsMORE
Paint Rack Tool Review
by James Bella
Airbrush Camo-Mask In-Box Review
by Brian Culbertson | of 1 ratings, 100% found this helpful
German Army Shelter Tent 3 Built Review
by Randy L Harvey | of 1 ratings, 0% found this helpful
German Army Shelter Tent 2 Built Review
by Randy L Harvey | of 1 ratings, 0% found this helpful
WWII German Army Shelter Tent Built Review
by Randy L Harvey | of 2 ratings, 50% found this helpful
WWII U.S. Army Shelter Tent Built Review
by Randy L Harvey | of 1 ratings, 100% found this helpful
Check Point In-Box Review
by Pete Becerra
large hex pavement Built Review
by Russ Amott | of 3 ratings, 100% found this helpful
small cobblestone Built Review
by Russ Amott | of 3 ratings, 100% found this helpful
Hex Pavement - Small Built Review
by Russ Amott | of 4 ratings, 100% found this helpful
Large cobblestone Built Review
by Russ Amott | of 4 ratings, 75% found this helpful
German supplies boxes 4 Built Review
by Russ Amott | of 1 ratings, 100% found this helpful
German Supply Boxes #3 Built Review
by Russ Amott | of 4 ratings, 100% found this helpful
Hetzer camo mask Tool Review
by James Bella | of 6 ratings, 100% found this helpful
Typical Leaf 2 In-Box Review
by Mario Krajinovic | of 6 ratings, 100% found this helpful

ADVERTISEMENT