Monday, March 08, 2010 - 08:47 PM UTC
SKP Model have just sent us notification of their latest, 1/35th scale release.
SKP 062 - Wheels for BTR, BRDM (early)

The set retals for 9.49 EUR.

Consisting of 5 Wheels + 4 hubs ther really isn't much to add to this report..

Our thanks to SKP Model for the Update!

Click Star to Rate
Only 1 reader has rated this.
Get a daily email with links to all our latest news, reviews, and features.

Comments

Hmm I sure hope these arent just resin copies of the poor DML kit wheels.
MAR 09, 2010 - 05:17 AM
The tires looks suspiciously like the tires including in all of the various BRDM/BTR kits from Arsenal/Eastern Express (BRDM-1) and DML/Zvezda (BDRM-2, BTR-70, BTR-80) but those do appear to be based on a real tire design - they seem to be a rather weakly defined version of what Hussar sells as "BRDM Polish Tread" only without the sidewall lettering and with shallow tread. Then again, I've not seen the Hussar wheels in person to verify if the cast tread matches the CAD image on their site. What I find strangest in the hubs. Every image of the BDRM-1 and BRDM-2 I've seen has a distinct hub - rather prominent with six spokes and a tire pressure regulation mechanism. SKP's CAD images seem to show the pressure line for the tire pressure mechanism, but not the complex hub or spokes, and a ring of bolts around the hub. If you check out the image of the BRDM wheel in situ on SKP's site, the hubs don't even match those on the photo of a BRDM-1 that they've shown beside them. Hmm. Well, I can't say for sure about the wheels - comparing them to Hussar's "Polish-type BRDM Wheels", their "Russian-type BRDM wheels" and the kit wheels, they do look very like the generic BTR wheels from the DML BTR-70/80 - but the hubs are definitely different from any of the other offerings that I've seen. Thing is, the hubs also look different from any I've ever seen on a BRDM too. If you check SKP's site, which shows the CAD image of the wheels and a photo of the real thing, they don't match. although they do look a lot like the generic BTR wheels) but the hubs are definitely different from any of the other offerings I've
MAR 09, 2010 - 09:16 AM
I have mixed feelings about this one, too. Unless they show more close-up photos of the actual resin wheels, you cannot tell whether the treadpattern and tired shape are correct or more accurate than other blocky BTR, BRDM wheels already on the market. Besides, more welcome release would be the modern wheels for a BTR-80A, which is not available online. But we'll see.
MAR 09, 2010 - 10:20 AM
They look nothing like the "Polish tread" This is the Polish tread. That's because they are not for a BRDM1 or 2. They are for a BTR60 and look quite good. While not used on the BRDMs, they are very good BTR60 wheels. Just need a decent BTR60 kit now.
MAR 09, 2010 - 10:37 AM
THIS STORY HAS BEEN READ 6,273 TIMES.
ADVERTISEMENT

Photos
Click image to enlarge
  • move
  • move
  • move
SKP Model ReviewsMORE
Tobruk In-Box Review
by Darren Baker
Dispatch Rider In-Box Review
by Darren Baker
GTK Boxer Light lenses First Look
by Adie Roberts
Lenses for 2S1 Gvozdika In-Box Review
by Matthew Lenton
Merkava ARV Lenses In-Box Review
by Darren Baker
T 64 Lenses and Taillights In-Box Review
by Darren Baker
BMP-3 Lenses and Taillights In-Box Review
by Darren Baker
Wheels for Ford V3000 In-Box Review
by Darren Baker
RG-31 Lenses and Taillights In-Box Review
by Darren Baker
Leopard 1 Lenses In-Box Review
by Darren Baker
Fallschirmjäger Brass Helmets In-Box Review
by Darren Baker | of 1 ratings, 100% found this helpful
Lenses for BM-21 Grad In-Box Review
by Darren Baker
T80U Lenses In-Box Review
by Jason West
T-90A Lenses In-Box Review
by Rob Harvey
Resin Jeep Wheels In-Box Review
by Darren Baker

ADVERTISEMENT