Sunday, September 11, 2011 - 09:23 PM UTC
We've just had another update from J's Work on the Work-in-Progress on a different direction from the company along with images of three new sets of moulds for sidewalks and walls.
There are a lot of different companies producing items such as modern jerrycans in Resin. However, up until now, there's been little in the way of movement in producing items such as these in styrene. Now, with the images of the W.i.P.s which J's Work have sent us, included is this, in 1/35th Scale:
PPA4001 - Modern Military Equipment Set
The will include:
8 X 200L Oil Drums
4 X Chemical Plastic Drums
8 X 20L Fuel Cans
8 X 20L Water Cans
4 X Transit Cases
8 X .50 Cal Ammo Boxes
4 X 20mm Ammo Boxes
CAD Images at the side.
Also included in this advance News, are three sets of silicone moulds to make your own sections of Sidewalk or walls. Now, what is unusual about these, is the design allows sections to be added to each other (like a plaster jigsaw!):
PPA3017 - Silicone Mould for 1/35th Scale Brick Wall
PPA3018 - Silicone Mould for 1/35th Scale Pavement (1)
PPA3019 - Silicone Mould for 1/35th Scale Pavement (2)
The Website: not only do the company have a listing of their products, they also have some nicely presented Guides to making trees and working with their silicon moulds for bricks and cobblestones. The Website can be seen:
HERE (LINK)
As to AVAILABILITY, the products of J's Work can be found at:
LuckyModel Website (LINK)
Our thanks to J's Work for the Update!
PPA4001 - Modern Military Equipment Set
The will include:
8 X 200L Oil Drums
4 X Chemical Plastic Drums
8 X 20L Fuel Cans
8 X 20L Water Cans
4 X Transit Cases
8 X .50 Cal Ammo Boxes
4 X 20mm Ammo Boxes
CAD Images at the side.
Also included in this advance News, are three sets of silicone moulds to make your own sections of Sidewalk or walls. Now, what is unusual about these, is the design allows sections to be added to each other (like a plaster jigsaw!):
PPA3017 - Silicone Mould for 1/35th Scale Brick Wall
PPA3018 - Silicone Mould for 1/35th Scale Pavement (1)
PPA3019 - Silicone Mould for 1/35th Scale Pavement (2)
The Website: not only do the company have a listing of their products, they also have some nicely presented Guides to making trees and working with their silicon moulds for bricks and cobblestones. The Website can be seen:
HERE (LINK)
As to AVAILABILITY, the products of J's Work can be found at:
LuckyModel Website (LINK)
Our thanks to J's Work for the Update!
Click Star to Rate
3 readers have rated this story.
THIS STORY HAS BEEN READ 6,515 TIMES.
Js Work Reviews | MORE |
Paint Rack by James Bella | |
Airbrush Camo-Mask by Brian Culbertson | of 1 ratings, 100% found this helpful | |
German Army Shelter Tent 3 by Randy L Harvey | of 1 ratings, 0% found this helpful | |
German Army Shelter Tent 2 by Randy L Harvey | of 1 ratings, 0% found this helpful | |
WWII German Army Shelter Tent by Randy L Harvey | of 2 ratings, 50% found this helpful | |
WWII U.S. Army Shelter Tent by Randy L Harvey | of 1 ratings, 100% found this helpful | |
Check Point by Pete Becerra | |
large hex pavement by Russ Amott | of 3 ratings, 100% found this helpful | |
small cobblestone by Russ Amott | of 3 ratings, 100% found this helpful | |
Hex Pavement - Small by Russ Amott | of 4 ratings, 100% found this helpful | |
Large cobblestone by Russ Amott | of 4 ratings, 75% found this helpful | |
German supplies boxes 4 by Russ Amott | of 1 ratings, 100% found this helpful | |
German Supply Boxes #3 by Russ Amott | of 4 ratings, 100% found this helpful | |
Hetzer camo mask by James Bella | of 6 ratings, 100% found this helpful | |
Typical Leaf 2 by Mario Krajinovic | of 6 ratings, 100% found this helpful |
Comments