135
PzKpfW V 'Panther' Ausf. G,

  • move
Building
I started the build by constructing most of PE sub-assemblies that would be added later. Starting with complicated PE constructions is a normal building practice for me. Taking this approach allows me to determine which kit parts will be replaced by PE before I make un-alterable changes to the kit. For example, I completely built the PE front fenders before removing the molded-on kit fenders. This way I was sure to have acceptable PE replacements ready before I cut off the kit fenders. The same was true for the tool racks and gun cleaning rod stowage tube: I built the PE assemblies before I filled the locating holes on the hull sides.

Note that I did NOT add any of these PE parts to the model at this time. As you will see, I saved them and only added them at the end of the build in order to protect them from damage. Almost all of the PE assemblies are put together with solder. This is for both strength and appearance. Good solder joints are nearly invisible and allow for handling in final assembly or "smashing" up to model realistic damage.

When assembling the PE tool racks and clamps, I used the kit tools as "spacers" to ensure that all the PE parts were correctly positioned to hold the tools. The AM-Works "working" tool clamps makes it easy to paint the tools separate and just clamp them on later at any time during the finishing and final assembly stages of the build.
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move

About the Author

About Mike Roof (SdAufKla)
FROM: SOUTH CAROLINA, UNITED STATES

I started modeling when I got a 1/72 Dauntless Dive Bomber for my 6th birthday in 1965 and havn't stopped since. Like many, I got my "serious" start when Monogram began putting Sheperd Paine's diorama "how-to" pamphlets in their kits in the early '70's. It was then that I realized that there co...


Comments

Mike I just want to take the time to thank you for sending in such a well written article.
NOV 28, 2011 - 12:49 AM
My pleasure, Darren! I hope that someone finds it useful, informative, or at least mildly entertaining. Happy modeling!
NOV 28, 2011 - 03:04 AM
I found it all 3, Mike...thank you!
NOV 29, 2011 - 05:49 PM
To all of my Armorama friends, both real-world and “virtual:” It with a heavy heart and much sadness that I must say to you all that as of today I can no longer, in good conscious, remain a member and active participant here on Armorama or any other KitMaker Net site. For many years, I have enjoyed my time here on Armorama. I have spent countless hours sharing my own builds and works with you, my friends. Over many hundreds of hours, I have tried to repay the debt I owe to modeling by sharing my techniques and methods while also answering questions. My intent has always been to try to help others to achieve their own modeling goals and to realize their own modeling potential. Through it all, I have tried to remain civil and respectful – To disagree without being disagreeable and to always be tactful. I think that in the main, I was able to do these things. I have especially enjoyed viewing and commenting on the works that you, my friends, have taken the time to share. It is this interaction and social contact with you that I will miss the most. Unfortunately, two recent incidents here by one of the official staff members have made Armorama a place where I cannot remain. Many of you may be aware of these two threads started by staff member Kevin Brandt, aka: SgtRam: Armorama::Armor/AFV::Ode to Rivet Counters Track_Link::General and Site News::Just Curious Although I was willing to overlook the first of these threads as a momentary lapse of judgement and civility, when Brandt pursued the targets of his vicious personal attack to another forum, I could no longer rationalize nor passively accept and condone his behaviors and actions. As an official member of the staff here on Armorama, Brandt holds a position of responsibility and represents both the site and its publisher. His behaviors are no longer the acts of a lone, anonymous internet voice; they become an extension of Armorama and its publisher. It does not matter that he (or anyone else) performs his functions here as a volunteer. As a staff member, he, his actions and his behaviors are inseparable from Armorama. I sent PMs and emails to some of the staff and the publisher to protest Brandt’s behaviors and to ask that the publisher, Jim Starkweather, aka: staff_jim, take responsibility for Brandt’s actions. Unfortunately, my protests fell on deaf ears. You may read Starkweather’s open reply here: Armorama::Site Talk::staff_jim post We are all judged, to some extent, by the company we keep, and at the time of my protest, it was my intention to simply cease any participation on any threads or topics that Brandt started or posted to. That intention, however, has shown itself to be impractical. I cannot separate the staff member from the site. The real issue here is one of personal and corporate responsibility and civility. As long as the publisher refuses to take responsibility for his staff members, or as long as Brandt refuses to accept and show remorse for his own actions, Armorama is a site that condones and supports such behaviors. To remain here, to continue to participate and contribute to this site’s content, is to effectively lend my own support and endorsement to what Brandt did and said. My personal ethic will not allow me to do so. I suppose the possibility remains that the publisher, Jim Starkweather, and or staff member, Kevin Brandt, will do the right thing. It is possible that one day they might take responsibility for Brandt’s behavior and demonstrate some remorse by publically apologizing to Kurt Laughlin and Christophe Jacquemont for Brandt’s aggressive and viscous personal attacks on them. Accepting responsibility and apologizing would do much to restore this site’s reputation and establish some reasonable boundaries for civil behavior by all. However, unless and until that day happens, I am afraid that I must bid you, my friends, farewell and… Happy modeling! Mike Roof, aka: SdAufKla
MAR 29, 2015 - 06:10 PM