1⁄35PzKpfW V 'Panther' Ausf. G,
4
Comments
Diorama Base
The base is founded on a pre-routed, un-finished wooden plaque. This was stained, sanded, and given a couple coats of rattle-can gloss lacquer (buffing with steel wool between coats). I added black felt to the bottom for a nice finished look. The terrain module is made of three ˝" thick layers of Styrofoam sheet, cut out like a contour map and glued together using hot glue. The initial contours were shaped using serrated knife and various rounded tool handles. The terrain module was kept separate from the wooden plaque until final finishing. The terrain module was then covered with ordinary plaster of Paris. The plaster was used to fill the holes on the edges and refine the terrain contours. After it dried, the edges were sanded smooth, and it received initial coats of flat black on the sides and earth tones on the top. At this time, the model was test fitted to the terrain and the track locations were marked out. Some trimming on the terrain contours was needed to get the suspension and tracks to fit the way I wanted them to. It was at this time that I made the final adjustments on the track length and tension and determined the final position of the tank on the base. The final contours of the terrain were made with Celluclay with a little bit of sand and gravel sprinkled on in spots to add some variety to the texture. Vegetation was made from several different colors of static grass and "clumps" of tall grass. Dead leaves were made from Notch leaves, and the small bushes were made from the same leaves on dried sea foam painted gray.Comments
Mike I just want to take the time to thank you for sending in such a well written article.
NOV 28, 2011 - 12:49 AM
My pleasure, Darren! I hope that someone finds it useful, informative, or at least mildly entertaining.
Happy modeling!
NOV 28, 2011 - 03:04 AM
To all of my Armorama friends, both real-world and “virtual:”
It with a heavy heart and much sadness that I must say to you all that as of today I can no longer, in good conscious, remain a member and active participant here on Armorama or any other KitMaker Net site.
For many years, I have enjoyed my time here on Armorama. I have spent countless hours sharing my own builds and works with you, my friends. Over many hundreds of hours, I have tried to repay the debt I owe to modeling by sharing my techniques and methods while also answering questions. My intent has always been to try to help others to achieve their own modeling goals and to realize their own modeling potential. Through it all, I have tried to remain civil and respectful – To disagree without being disagreeable and to always be tactful. I think that in the main, I was able to do these things.
I have especially enjoyed viewing and commenting on the works that you, my friends, have taken the time to share. It is this interaction and social contact with you that I will miss the most.
Unfortunately, two recent incidents here by one of the official staff members have made Armorama a place where I cannot remain. Many of you may be aware of these two threads started by staff member Kevin Brandt, aka: SgtRam:
Armorama::Armor/AFV::Ode to Rivet Counters
Track_Link::General and Site News::Just Curious
Although I was willing to overlook the first of these threads as a momentary lapse of judgement and civility, when Brandt pursued the targets of his vicious personal attack to another forum, I could no longer rationalize nor passively accept and condone his behaviors and actions.
As an official member of the staff here on Armorama, Brandt holds a position of responsibility and represents both the site and its publisher. His behaviors are no longer the acts of a lone, anonymous internet voice; they become an extension of Armorama and its publisher. It does not matter that he (or anyone else) performs his functions here as a volunteer. As a staff member, he, his actions and his behaviors are inseparable from Armorama.
I sent PMs and emails to some of the staff and the publisher to protest Brandt’s behaviors and to ask that the publisher, Jim Starkweather, aka: staff_jim, take responsibility for Brandt’s actions. Unfortunately, my protests fell on deaf ears.
You may read Starkweather’s open reply here:
Armorama::Site Talk::staff_jim post
We are all judged, to some extent, by the company we keep, and at the time of my protest, it was my intention to simply cease any participation on any threads or topics that Brandt started or posted to. That intention, however, has shown itself to be impractical. I cannot separate the staff member from the site.
The real issue here is one of personal and corporate responsibility and civility. As long as the publisher refuses to take responsibility for his staff members, or as long as Brandt refuses to accept and show remorse for his own actions, Armorama is a site that condones and supports such behaviors.
To remain here, to continue to participate and contribute to this site’s content, is to effectively lend my own support and endorsement to what Brandt did and said. My personal ethic will not allow me to do so.
I suppose the possibility remains that the publisher, Jim Starkweather, and or staff member, Kevin Brandt, will do the right thing. It is possible that one day they might take responsibility for Brandt’s behavior and demonstrate some remorse by publically apologizing to Kurt Laughlin and Christophe Jacquemont for Brandt’s aggressive and viscous personal attacks on them. Accepting responsibility and apologizing would do much to restore this site’s reputation and establish some reasonable boundaries for civil behavior by all.
However, unless and until that day happens, I am afraid that I must bid you, my friends, farewell and…
Happy modeling!
Mike Roof, aka: SdAufKla
MAR 29, 2015 - 06:10 PM
Copyright ©2021 by Mike Roof. Images and/or videos also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of Armorama, KitMaker Network, or Silver Star Enterrpises. All rights reserved. Originally published on: 2011-11-28 00:00:00. Unique Reads: 23362