1⁄35
French BEEP

a build story by Frédéric Dété
...
Post a Comment

The cargo compartment is first assembled without it’s door. The molded on hooks are replaced by PE parts (2 on each side of the compartment and 2 in the back). The racks are built without modification as they will be hidden by the tarp. CF PHOTO Beep-07

The mechanism to close the door is made with the sheet metal from a floppy disk and detailed with some chain. CF PHOTO Beep-08

The windscreen is detailed, mainly around it’s fixing. A plastic card and four verlinden resin nuts are added. A last nut is glued at the bottom of the windscreen. CF PHOTO Beep-09

The slides for the windscreen are added. They come from the Eduard sheet. CF PHOTO Beep-10 et Beep-11

The motors of the wipers, made of plasticard, and their electric cabling are added. CF PHOTO Beep-12 et Beep-13

  • Beep-07
  • Beep-08
  • Beep-09
  • Beep-10
  • Beep-11
  • Beep-12
  • Beep-13

About the Author

About Frédéric Dété (kalliste)
FROM: HAUTE-CORSE, FRANCE


Copyright ©2021 by Frédéric Dété. Images and/or videos also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of Armorama, KitMaker Network, or Silver Star Enterrpises. All rights reserved. Originally published on: 2005-05-08 00:00:00. Unique Reads: 10047