Nice se of drawings found on the internet:
Яusso-Soviэt Forum
Russian or Soviet vehicles/armor modeling forum.
Russian or Soviet vehicles/armor modeling forum.
Hosted by Darren Baker, Jacques Duquette
maz-543 truck ideas (from the scud kit)
Posted: Sunday, January 13, 2013 - 03:39 AM UTC
heliman
New York, United States
Joined: June 14, 2010
KitMaker: 702 posts
Armorama: 604 posts
Joined: June 14, 2010
KitMaker: 702 posts
Armorama: 604 posts
Posted: Sunday, January 13, 2013 - 12:36 PM UTC
Great work! I've had this beast watching me from the stash..might be time to attempt the Smerch
looking forward to future progress
looking forward to future progress
Posted: Tuesday, January 15, 2013 - 06:07 AM UTC
Anyone out there have info/photos of MAZ-543 in its fifth wheel tractor configuration? I am interested in it either in the four or five passenger version? Notice the closer spacing on the two rear axles and the huge leaf springs instead of walking beams back there. I am thinking of mixing the Scud Missile Carrier cab with the MAZ-537 tractor kits to build this monster.- -the Chassis Man
Posted: Saturday, January 19, 2013 - 08:11 AM UTC
F.Y.I. The Scud-543 kit has no driveline at all. The MAZ-537 kit has some driveline included in the kit but what is there is wrong. Please see below:
Posted: Sunday, January 20, 2013 - 02:11 AM UTC
One detail that is left out entirely is the small but very visible driveshaft that runs from the top of the transfer case to the winch. In the kit the fixture is there on the transfer case and also the one on the bottom of the winch housing but no driveshaft to connect them????? I used a small driveshaft from a spare GMC Deuce.
Posted: Sunday, January 20, 2013 - 05:25 AM UTC
Posted: Sunday, January 20, 2013 - 12:12 PM UTC
Posted: Thursday, February 14, 2013 - 12:06 AM UTC
Gotta love these monster Russian fuel trucks!
Teaker11
California, United States
Joined: July 02, 2009
KitMaker: 962 posts
Armorama: 786 posts
Joined: July 02, 2009
KitMaker: 962 posts
Armorama: 786 posts
Posted: Saturday, February 16, 2013 - 12:46 PM UTC
I have a file about 1 1/2 inches thick of info for the MAZ 543 5th wheel conversion and also the axle diminsions but I cant seem to find that picture at the moment, also I have pictures of a completed truck made by a friend . He used a paper model to scale the kit he built complete with engine, drive train and passenger compartment hindged to open forward, up to service the engine. This is one of my future builds the name of the truck is MAZ 7410 in that version.
Jim
Jim
Posted: Tuesday, February 26, 2013 - 11:55 PM UTC
Jim - would you possibly be able to post dimensional drawings and or any info on the fifth passenger cab?
Teaker11
California, United States
Joined: July 02, 2009
KitMaker: 962 posts
Armorama: 786 posts
Joined: July 02, 2009
KitMaker: 962 posts
Armorama: 786 posts
Posted: Friday, March 01, 2013 - 02:19 AM UTC
Sorry for takeing so long, I hope this is what your after
Jim
Jim
Posted: Sunday, March 17, 2013 - 01:42 AM UTC
That last drawing is EXACTLY what I was looking to find. Thanks so much.
Teaker11
California, United States
Joined: July 02, 2009
KitMaker: 962 posts
Armorama: 786 posts
Joined: July 02, 2009
KitMaker: 962 posts
Armorama: 786 posts
Posted: Sunday, March 24, 2013 - 08:28 AM UTC
I just picked up a $5.00 Paper model of the MAZ 7100 tractor that I hope I can scale it up for my build if its good Ill let you know
Jim
Jim
Teaker11
California, United States
Joined: July 02, 2009
KitMaker: 962 posts
Armorama: 786 posts
Joined: July 02, 2009
KitMaker: 962 posts
Armorama: 786 posts
Posted: Monday, March 25, 2013 - 12:32 AM UTC
Sorry forgot to list site:
Ecardmodels.com
1/100 Maz-7410 Tractor and trailer
Thanks Jim
Ecardmodels.com
1/100 Maz-7410 Tractor and trailer
Thanks Jim
Posted: Wednesday, May 15, 2013 - 08:01 AM UTC
Anyone have any info on the FIVE PASSENGER CAB version of the MAZ-543 semi-tractor shown a few posts above?
Frenchy????
Frenchy????
Posted: Wednesday, May 15, 2013 - 08:16 AM UTC
Look at this great image I just picked up from some photos that Frenchy (thank you) sent me! I love the extra foam bottles mounted up on the right side and the horizontal hose reel and manual foam spreading nozzle mounted/stowed on the fromt bumper! (More details I need to add to my model!)
Another photo, this time from RCforum.ru
Another photo, this time from RCforum.ru
Posted: Wednesday, May 15, 2013 - 08:37 AM UTC
From Frenchy:
Quoted Text
--------------------------------------------------------------------------------
Btw, you have any pics of the MAZ airport fire truck that you can share?
--------------------------------------------------------------------------------
What about these ?
http://gvtm.ru/maz-543_aa-60
http://www.m43.narod.ru/us_cars/publications/airport_firetrucks_3.htm
http://rcforum.su/showthread.php?t=18337&page=16
http://fotki.yandex.ru/users/dmirg78/album/270211/?
http://photo.qip.ru/users/pakuro/4103890/
http://www.gruzoviki.ru/id-325448.html
H.P.
Quoted Text
--------------------------------------------------------------------------------
Btw, you have any pics of the MAZ airport fire truck that you can share?
--------------------------------------------------------------------------------
What about these ?
http://gvtm.ru/maz-543_aa-60
http://www.m43.narod.ru/us_cars/publications/airport_firetrucks_3.htm
http://rcforum.su/showthread.php?t=18337&page=16
http://fotki.yandex.ru/users/dmirg78/album/270211/?
http://photo.qip.ru/users/pakuro/4103890/
http://www.gruzoviki.ru/id-325448.html
H.P.
Posted: Tuesday, May 28, 2013 - 06:30 AM UTC
Posted: Sunday, June 30, 2013 - 03:07 AM UTC
Progressing on my fire truck with a very, very basic driveline.
I pulled the very flawed transfer case out of the Maz-537 tractor kit for use here. (I will be scratch building a new transfer case for the tractor since it is so visible in the finished kit.) I did scratch build an emergency brake assembly and many of the driveshaft parts came from my spares box, originally being sourced from the Tamiya M-26 recovery tractor.
I pulled the very flawed transfer case out of the Maz-537 tractor kit for use here. (I will be scratch building a new transfer case for the tractor since it is so visible in the finished kit.) I did scratch build an emergency brake assembly and many of the driveshaft parts came from my spares box, originally being sourced from the Tamiya M-26 recovery tractor.
Posted: Monday, July 22, 2013 - 07:46 AM UTC
Hey Gents, this weekend I attended a major Negional Concours Auto Show here in Lexington, KY. It happened to coinside with a B-17 fly-in the same weekend.
I am rather proud of the 25 or so photographs I have posted so far with more to come.
I would like to share so follow the link:
https://www.facebook.com/media/set/?set=a.10151680962803956.1073741830.733523955&type=1&l=93f27c61d7
Mercedes-Benz Indianapolis 500 Car ca.1914
I am rather proud of the 25 or so photographs I have posted so far with more to come.
I would like to share so follow the link:
https://www.facebook.com/media/set/?set=a.10151680962803956.1073741830.733523955&type=1&l=93f27c61d7
Mercedes-Benz Indianapolis 500 Car ca.1914
bronzey
England - South East, United Kingdom
Joined: January 06, 2012
KitMaker: 300 posts
Armorama: 256 posts
Joined: January 06, 2012
KitMaker: 300 posts
Armorama: 256 posts
Posted: Monday, July 22, 2013 - 12:13 PM UTC
Guys,
Ok WOW, this truck is insane!!! I love it, its so big and ugly and monster like! I've wanted to do the scud launcher for ages now and I hope that one day I could pull off what you guys have here, they are wicked, take note Meng, Trumpter, tamiya, ANYONE! do a range of these trucks and they will sell, nothing sells better than a big mean looking kit to go on display
Bronzey
Ok WOW, this truck is insane!!! I love it, its so big and ugly and monster like! I've wanted to do the scud launcher for ages now and I hope that one day I could pull off what you guys have here, they are wicked, take note Meng, Trumpter, tamiya, ANYONE! do a range of these trucks and they will sell, nothing sells better than a big mean looking kit to go on display
Bronzey
Posted: Saturday, October 26, 2013 - 05:59 AM UTC
18Bravo
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Saturday, October 26, 2013 - 06:16 AM UTC
Posted: Saturday, October 26, 2013 - 09:34 AM UTC
You got my vote! I always thought; darn the differences in scales - either you use the HO locomotive body and scratch the chassis, wheels and tires or you use the chassis, wheels and tires from the 1/35th scale kit and scratch the entire loco body!!!
Mike
Mike
Posted: Saturday, October 26, 2013 - 09:36 AM UTC
Also, is it a 10x10 or really a 12x12 with one tire missing?