Available from Custom-Scale is a conversion set that builds a concrete protective ring for a 2cm Flakvierling mounted on the Sd.Ah.115 trailer.

Build this radar-enhanced 3cm Flakvierling 103/38 anti-aircraft gun system with this new kit from Custom-Scale.

The new 12,8cm Flak 44 vereinfachte Bettung Conversion Kit is ready

For what-if enthusiasts, Custom-Scale offers a conversion set to build an armed reconnaissance vehicle using the E-50 chassis.

Custom-Scale offers a conversion kit to build a hard top cab for the Faun L900.

Available from Custom-Scale is a conversion set to build the winged version of the German A4, commonly referred to as the V-2.

Custom-Scale provides a set to build a Büssing NAG 4500 as a mobile FlaK platform.

Upgrade your Hanomag SS-100 build with this new bundled set from Custom-Scale.

Detail up your Faun L900 and trailer build with these new items from Custom-Scale. Also available is a front grill set for the Hanomag SS-100.

Custom-Scale adds two new kits to its catalog.

Since last reported on, four new kits have been added to the Custom-Scale catalog. Available is a 1/35 scale conversion set to build a twin AA gun platform, full kits for special trailers, as well as a turret set for a Panther-based AA gun platform in braille scale.

Recently added to the Customscale catalog are three conversion sets for German WWII modelling subjects.

A recent release from Customscale is a conversion set that builds another version of the Hanomag SS-100 crane truck, depicting a vehicle with a 4-door cab configuration.

Two new sets have been added to the CustomScale catalog. Listed are a Rheinmetal-Borsig Fire Lily F-55 rocket with transport trailer and a twin 55mm anti-aircraft gun and turret conversion set for a Panther Ausf. G chassis.

New anti aircraft gun from Custom Scale, the German 5,5 cm Flak Gerät 58.

A recent release from Customscale offers a display base for a FlaK gun or missile launcher as a fixed installation.

Recent releases from Customscale venture into figures and a diorama base for a what-if street fighting scenario in Berlin. The series was in collaboration with model artist David Strauss.

Customscale has released two kits of this WWII-era German ground-to-air missile together with launch ramps.

Custom Scale has a new conversion for the Hanomag SS-100, now adding a large crane on the back.

A recent release from Customscale provides a correction set for the Hobby Boss kit.

Customscale has released its kit that corrects and provides further details to help improve the Takom kit.

Custom-Scale, in collaboration with MR Modellbau, has released a conversion kit to build a PzKpfw II Ausf L with a 5cm gun.

Custom-Scale follows up with another release on the Enzian surface-to-air missile, this time with a kit of its designated production version, the E-4.

The latest from Customscale is the WWII-era German surface-to-air missile, the Wasserfall.

New from Customscale is its kit depicting the Enzian, a German anti-aircraft missile developed during the Second World War.

Custom-Scale adds another to its line of rocket of kits, this time an anti-aircraft weapon developed and tested by the German company Rheinmetal-Borsig during the Second World War.

Of late we have seen U.S. tractors in kit form, this time around a kit of a German-made vehicle is provided to us by Custom-Scale.

Looking for a different turret for your E-50? Check out Custom-Scale’s latest offering.

Planning on building Takom’s Hanomag SS-100 as an artillery tractor? Take a look at Custom-Scale’s 8.8cm ammunition bins to complete your ensemble.

New paper panzer conversion from Customscale, a huge turret with a Flak41 for the E-50.

Custom-Scale’s latest is the Sd.Ah.206 mit Behelfslafette für leichtes Einsatzgerät ("Special Trailer 206 with Carriage for Light Auxiliary Equipment")

Custom-Scale presents its Rheintochters in 1/72 scale and in various firing platform configurations.

Custom Scale released a new kit in 1/35 scale, a German Hanomag tractor.

Customscale informed us on their latest kit, a 1/35 conversion set for adding full armor to the Sd.Kfz. 7.

Customscale released another Flak base in 1/35 scale, this time it is a reissue of a discontinued MR Modellbau kit.

Customscale released another impressive conversion in 1/35 scale. This time it is a "what-if" anti-aircraft rocket project based on E-100 chassis.

Customscale released a new 1/35 scale kit, a base for Flak transport.

Customscale released a new kit in 1/35 scale... something a bit different.

Customscale released a new kit in 1/35 scale, a conversion for Bronco's V1 turning it into a manned rocket.

Michael Baldeweg from Customscale informed us on his new kit, a heavy German crane in 1/35 scale.

Customscale released a new full resin kit in 1/35 scale. This time it is a trailer for Flakzwilling 43.

Customscale keeps on releasing really interesting German WW2 conversions... this time we present the 1/35 scale 2cm Gebirgsflak on RSO conversion kit.

Michael from Customscale informed us on his new conversion kit in 1/35 scale... an up-armored Sd.Kfz. with some extra firepower.

Michael Baldeweg from Customscale informed us on his upcoming conversion giving some additional firepower for your 1/35 scale Schwimmwagen.

Customscale released two new kits in 1/35 scale. The first being a very interesting conversion for their existing GW Panther Gerät 5-1211 w Pak 44, and the other is ammunition set for 3cm Flak.

Customscale is well know for their 1/35 scale resin kits of German secret weapons and paper panzers. Now, the company ventures in braille scale with their first release depicting GW Panther Gerat 5-1211 w PAK 44.

Customscale just informed us on their new kit, a Strofftrailer for the V2 program.

Customscale has been very busy. This time we have news of their latest release, a full resin Gebirgsflak 38.

Michael Baldeweg from Customscale informed us about his latest release, a very comprehensive Paper Tank conversion kit in 1/35 scale.

After introducing Customscale to Armorama yesterday, we have a new story on the company and their products. This time we present Customscale's new full resin kit featuring PAK 44.