1⁄48
Tuesday, January 21, 2020 - 09:14 PM UTC
New modern Watchtower from MacOne Models, for 1/48 scenes.
The kit is based on the existing Vigilance towers in Iraq, although it has been used in the same format or with slight changes in other countries of the Middle East.
The kit is made of acrylic resin, very similar to plaster but much harder. If you want to replicate break and damage, the result is much more real and similar to concrete.
Total height is 140 mm (5.51 in) , base of 48 x 48 mm (1.89 x 1.89 in)
The tower consists of 3 sections and can be raised with the MAC48006 kit.
Note that the same tower is available also at 1/35 here
The kit is made of acrylic resin, very similar to plaster but much harder. If you want to replicate break and damage, the result is much more real and similar to concrete.
Total height is 140 mm (5.51 in) , base of 48 x 48 mm (1.89 x 1.89 in)
The tower consists of 3 sections and can be raised with the MAC48006 kit.
Note that the same tower is available also at 1/35 here
Click Star to Rate
2 readers have rated this story.
THIS STORY HAS BEEN READ 3,785 TIMES.
MacOne Models Reviews | MORE |
Watchtower by Carlos Martin | |
Garbage Cans, Cats and Rats by Carlos Martin | |
Volkswagen Type 82E wheels by Carlos Martin | |
Plastic Water Bottles by Carlos Martin | |
Sagged W.O.T. Dunlop Wheels by Carlos Martin | |
Watchtower and Stuff by Carlos Martin | |
Gas Station by Mario Matijasic | |
Silo by Mario Matijasic | |
Bollards by Mario Matijasic | |
Bus Stop by Mario Matijasic | |
AML 60 & 90 Sagged Wheels by Mario Matijasic | |
Books by Mario Matijasic | |
Wall with Door by Carlos Martin | |
Plastic Boxes PELICAN by Mario Matijasic | |
Mortar artillery Syria by Mario Matijasic |
Comments