Campaigns: Completed Campaigns
Campaigns that are completed should be grouped here.
Hosted by Richard S.
Tank Hunters Campaign
tatbaqui
Staff MemberNews Writer
ARMORAMA
#040
Visit this Community
Metro Manila, Philippines
Joined: May 06, 2007
KitMaker: 2,713 posts
Armorama: 2,451 posts
Posted: Saturday, October 08, 2016 - 04:44 AM UTC

Quoted Text

Guys..

My second entry for this build.. the miniart su122 will be completed when this 2nd entry finished.

This second kit is an old classic kit from tamiya 1/25 series..

This kit was made in 1972 but the one that i bought is reissue in 2010 but all the parts are still original 1972 classic with the removal of the RC parts. It also come with a new partial instruction manuals and the original manuals(in japanese n english).

I will pretend to be innocent with this kit and ignore all the inaccuracies in this kit. Although i will try to improve it to the minimal. Here it goes.. progress was 3 days old.

The kit did not supply periscopes. With this large scale the empty periscope opening is too noticeable.



So using 2x4mm strip..i scratchbuild 4 of them. Very basic shape.

Then i cut an old film negative for the periscope 'lens'.


The gun mantlet are smooth so replicate the cast steel effect with mr.surfacer 500.


Add rust texture to the exhaust pipe too.


This kit is an open sponson kit...so i will cover the opening with styrene sheet ..

This is the progress so far


Very huge beast...


Thanks for looking

Sil



Very nice Sil. I like the idea of using those photo negatives.
wedgetail53
Visit this Community
Queensland, Australia
Joined: October 02, 2008
KitMaker: 658 posts
Armorama: 629 posts
Posted: Saturday, October 08, 2016 - 05:04 AM UTC
Zaidi

Looking good, but I would recommend you check up on the exhaust pipes. Where there are three pipes together, I think you'll find that the one in the middle is the exhaust pipe - the outside ones are fresh air inlet pipes.

Regards

Rob
ClaytonFromEllijay
#454
Visit this Community
Georgia, United States
Joined: July 10, 2016
KitMaker: 1,273 posts
Armorama: 1,138 posts
Posted: Saturday, October 08, 2016 - 05:19 AM UTC

Quoted Text

Awesome kit Sil I've toyed with the idea of building it myself. Is the suspension fully working? And are the tracks rubber bands? It was designed originally for remote control as you said.

Dustin great work with the Elefant. Isn't the Tamiya Zimmerit just the shiz? Just love the jeweler's wire for tow cables! Looking forward to seeing her with a coat of paint.

Bryan love the E-25 interesting camo scheme it certainly is eye catching. And the IR gear looks truly deadly!

Paul great work on the KV it certainly is BIG! I can't wait to see what you put it next to to give an idea of it's size and bulk.

Okay so I started work on my wingy thing and here is where I'm at after two days. This kit has photo-etch in two thicknesses the I.P is made from stainless steel close to a mm thick and it's totally next level in terms of detail. It does need undercoating though because I didn't and the paint literally just wipes off it. There are also parts to make the headrest. The harness is around .25 of a mm and has aerials and the band for the drop tank.

The kit would lend itself to have an aftermarket resin engine quite well as the cowling is a multi part affair. Being multipart though does create some complex joins that require quite a bit of finesse to get them to meet up. I built the engine cowl, the fuselage and the wings as separate assemblies. I then joined the wings and the fuselage together got it to fit reasonably well let it cure for a couple of hours and then attached the cowl. The bottom of the cowl where it meets the wings and fuselage was a definite challenge. The armoured ring that goes around the oil cooler at the front also has a representation of the front of the BMW801-D reduction gear ignition harness ring which will look good behind the cooling fan.

I'm enjoying this kit quite a bit I built the Fw190-D version of it in the promodeler boxing but it didn't have the etch that this does and it was the inline engine not the radial. (Wonders if he's just lost the armor fraternity)

For you guys that like aviation subjects as well, looks at Gary, if you get the chance to build this kit I humbly suggest you do. The wheel wells are a mini kit in themselves, with bracing and barrels for the MG-151 eight separate pieces in all. The landing gear is also very nicely detailed with an accurate depiction of the mounting of the gear doors ( to me at least). Anyway enough waffling onto the pics!

























Your wingy thing is looking good, Chris!
GazzaS
#424
Visit this Community
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
Armorama: 2,248 posts
Posted: Saturday, October 08, 2016 - 05:49 AM UTC
Guys,
This campaign is moving so quickly that it's easy for me to miss a post. So forgive me if my replies get out of sequence.

Iain,
That is an amazing amount of parts for the gunsight of your 17lb-er. I can see your wisdom of building it while still on the sprue. I remember when I was a kid and money was tight, I always wanted "more parts". Now that I have more money and less manual dexterity I find myself saying "over-engineered".

Still, this is a golden time for us model builders.

Gaz
GazzaS
#424
Visit this Community
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
Armorama: 2,248 posts
Posted: Saturday, October 08, 2016 - 05:53 AM UTC
Chris,
Glad to see your Focke-Wulf progressing. It's gonna look so strange with those AT guns pointing downwards.

Still...it's an FW190....cool under any circumstances.

Gaz
Silantra
Visit this Community
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Saturday, October 08, 2016 - 07:12 AM UTC
Thanks fellas for your input..

Rob... my my my... must be me getting old... i read about the cooling pipe but got mixed up and think the exhaust pipe were those 2 pipes.. i will corect it. Thanks so much for addressing it. This is also result from working at 2am in the hot very hot evening...


Chris..
The tracks came preassembled. They were made of a different plastic. Its something like harden vinyl. Its hard enough but still soft if it needed to be cut. They are snap together.
The suspension can articulate too... the design is so simple with no spring. I will upload photos or.maybe videos if i had the time.

Anyway... this build will be completed before december as this will be also an entry in my local club group build.


Good luck.to others...
supaderpa
Visit this Community
Malaysia
Joined: March 28, 2016
KitMaker: 157 posts
Armorama: 140 posts
Posted: Saturday, October 08, 2016 - 08:48 AM UTC
Ah the Focke Wulf...That brings me back.. I remember my uncle geting a Tamiya FW (can't remember which one) when I was a kid for my birthday..or was it christmas?

Anyway... as a kid with no prior knowledge on model building, you can guess what eventually happens to the poor thing...

zontar
Visit this Community
Hawaii, United States
Joined: August 27, 2006
KitMaker: 1,646 posts
Armorama: 1,557 posts
Posted: Sunday, October 09, 2016 - 03:11 AM UTC
Aloha All,
Wow, step away for a bit and a lot happens here. Some great builds going on.

I've made modest progress on the JagdLuther. A bit more clean up, then I can prime. I've ordered the camo colors, so hopefully they will arrive soon.





[IMG]http://i151.photobucket.com/albums/s154/zonlisa/Tank%20Hunters%20-%202016/015-legs_zpsny3pjhjf.jpg[/IMG

Happy Modeling, Zon
Silantra
Visit this Community
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Sunday, October 09, 2016 - 06:28 AM UTC

Quoted Text

Aloha All,
Wow, step away for a bit and a lot happens here. Some great builds going on.

I've made modest progress on the JagdLuther. A bit more clean up, then I can prime. I've ordered the camo colors, so hopefully they will arrive soon.





[IMG]http://i151.photobucket.com/albums/s154/zonlisa/Tank%20Hunters%20-%202016/015-legs_zpsny3pjhjf.jpg[/IMG

Happy Modeling, Zon



Great looking gun Zon... keep it up

i love your pinky (or purple) cutting mat. It gives a cool look to the workbench.

Sil
Silantra
Visit this Community
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Sunday, October 09, 2016 - 07:02 AM UTC
time for some small update for the 1/25th jadgpanther..

to close the open sponson, first i cut and glue styrene strip to the hull. Just a simple measurement done with ruler and pencil to mark the line.


then i cut paper as template to ensure good fit.

the paper template is good to go. Will replace that with 1mm sheet later.

the 4 periscope were detailed a bit on the part that join the hull. Then i primed it with vallejo primer.


Here is the track. It came pre assembled.



as promised, here is the video of the tracks and suspension system. How they articulate.


that's for now fellas. Thanks for looking

Sil

zontar
Visit this Community
Hawaii, United States
Joined: August 27, 2006
KitMaker: 1,646 posts
Armorama: 1,557 posts
Posted: Sunday, October 09, 2016 - 07:08 AM UTC
Sil: thanks for the comment. The mat is Hot Pink! As I'm sure you know, when you live on an island, you learn to make do. It does give nice contrast to the dark greys though.

-zon
zontar
Visit this Community
Hawaii, United States
Joined: August 27, 2006
KitMaker: 1,646 posts
Armorama: 1,557 posts
Posted: Sunday, October 09, 2016 - 07:13 AM UTC
Sil: nice work on the jagdpanther. Somehow I missed that it is 1/25th scale. Big one. Good solution for closing the sponson and the periscopes.

-zon
Silantra
Visit this Community
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Sunday, October 09, 2016 - 01:37 PM UTC

Quoted Text

Sil: nice work on the jagdpanther. Somehow I missed that it is 1/25th scale. Big one. Good solution for closing the sponson and the periscopes.

Sil: thanks for the comment. The mat is Hot Pink! As I'm sure you know, when you live on an island, you learn to make do. It does give nice contrast to the dark greys though.

-zon



thanks zon...
i dont know xacto do a pink mat... cant find em in local art stores... bored with green mat...

GazzaS
#424
Visit this Community
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
Armorama: 2,248 posts
Posted: Sunday, October 09, 2016 - 02:16 PM UTC
Zon,
I like the look of the twin PaK 40's with their triple-baffled muzzle brakes. It's gonna look like one of those things you want to see in a sci-fi movie.

Zaidi,
Nice progression. I've never covered open sponsons before, so I'll be using your method as a tutorial.

Gaz
supaderpa
Visit this Community
Malaysia
Joined: March 28, 2016
KitMaker: 157 posts
Armorama: 140 posts
Posted: Sunday, October 09, 2016 - 03:43 PM UTC
Zon, as a huge fan of dieselpunk, I really love that mech that you're building. Its gonna turn out all sorts of cool when its done.

Zaidi, nice to see a fellow Malaysian here. Kudos on taking an old kit with a ton of flaws and turning it into something great. 1/25 is quite a hefty scale.
Klaus-Adler
Staff MemberCampaigns Administrator
MODELGEEK
Visit this Community
Scotland, United Kingdom
Joined: June 08, 2015
KitMaker: 1,505 posts
Armorama: 840 posts
Posted: Sunday, October 09, 2016 - 05:31 PM UTC
just a brief update on the British para PIAT team: they have now been coated in primer paint and any gaps that were missed have been filled in using MR Hobby liquid putty.

rather than having them as a generic anti-tank team i am going to set them in Normandy during the opening hours of the D_Day landings

Black_sheep
Visit this Community
Bayern, Germany
Joined: December 11, 2009
KitMaker: 823 posts
Armorama: 170 posts
Posted: Monday, October 10, 2016 - 12:14 AM UTC
Hello mates,

this is my second week´s progress report: First let me say thank you to Gaz, Clayton and Brian for your encouraging comments; I will continue to do my best.

@Gaz: I dont see a necessarity to hide your Marder in a dark Corner, hehe. Just lets see how our both animals will show up in the end.

This weekend I was able to spend some time in finish the paint works for the complete driver´s compartment. I spilled some dust and oil at the bottome around the gear and clutch and used some small technical manual Posters for the side walls.





I also made the appropriate technical marking onto the electrical junction box with a very fine brush and red oil Color. It Looks very rough but it is veery small...



too bad not much of it will be seen again through the hatches after I glue the top armoured plate to the hull. But I know its there

Continue with the undercarriage and wheels now

Cheers

Thomas (the true Marder )
SgtRam
Staff MemberContributing Writer
AEROSCALE
#197
Visit this Community
Ontario, Canada
Joined: March 06, 2011
KitMaker: 3,971 posts
Armorama: 2,859 posts
Posted: Monday, October 10, 2016 - 12:40 AM UTC
@Thomas - looking good, looking forward to your progression.
GazzaS
#424
Visit this Community
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
Armorama: 2,248 posts
Posted: Monday, October 10, 2016 - 10:38 AM UTC
David,
The detail on the paras and their gear is pretty fine. What's your preferred tool for removing small pieces of resin from the block?

Gaz
GazzaS
#424
Visit this Community
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
Armorama: 2,248 posts
Posted: Monday, October 10, 2016 - 10:39 AM UTC
Thomas,
Those details look great!
zontar
Visit this Community
Hawaii, United States
Joined: August 27, 2006
KitMaker: 1,646 posts
Armorama: 1,557 posts
Posted: Monday, October 10, 2016 - 01:15 PM UTC
Sil: the mat was at Wal-Mart a couple of years ago, in the sewing section as I recall. They had a bunch of different things in the same pink, all from x-acto. Not sure about now though. They might have a different color.

Gaz and Brian: thank you for the comments. The guns do look the part and the completed mech will be cool.

David: the Piat team is coming along nicely. Not to nitpick your concept on the setting, but were there any German tanks to hunt in the early hours of D-Day? I suppose they could be bunker busting. Just curious. I don't know that much about the British and Canadian beaches.

Thomas: your interior looks awesome. Kind of makes you want to not glue the top on so you can peek in.

Happy Modeling, zon
erichvon
Visit this Community
England - East Midlands, United Kingdom
Joined: January 17, 2006
KitMaker: 1,694 posts
Armorama: 1,584 posts
Posted: Monday, October 10, 2016 - 01:32 PM UTC
David, the use of a PIAT by airborne troops would be fine for D-Day. The Ox and Bucks knocked out a Panzer IV at Pegasus Bridge in the early hours of D-Day, a sergeant whose name escapes me at the moment. Similarly a PIAT was used to dislodge a German sniper who was in the church tower at Ranville. Contemporary photos show that it made a real mess of the tower. Lt Den Brotheridge who was the first Allied soldier to be killed on D Day is buried in the small churchyard there which is next to the large CWGC cemetery, the bulk of which are 6th Airborne casualties. I'm not sure why they left him in the churchyard as the CWGC is literally next door. There are 40 odd British casualties buried in the churchyard so I can only think that it was the initial burial site on the day.
Silantra
Visit this Community
Putrajaya, Malaysia
Joined: March 04, 2004
KitMaker: 2,511 posts
Armorama: 913 posts
Posted: Monday, October 10, 2016 - 09:11 PM UTC
Bryan,
There used to be many malaysian here in armorama. Most of them are inactive thesedays...u can find em or what is their nicknames in the malaysian sub forum : kaki models..
Anyway thanks... i will try to do a simple correction n pretend not knowing the inaccuracies of this kit. Janji siap...






Zon..

There is no walmart here... but xacto knives cat be found in a few high end art supply stores.. huhu...

Anyway... only small update that i can share..most of the time consumed is in the turning machine.. the tamiya barrel was somehow need to be fill n sanded..so i fill up with mr.dissolve putty..turn it on my cordless crew driver.. this toook 1 hour... phew


There were holes in the transmision box casing..2 holes for the supplied screw. They casing were inteded to be screwed but i glued them to hull.. so i close the hole with HO hex nuts.the brown color in the photo below. Lucky it fit just right even smaller by maybe 0.4mm..



Periscopes were installed.





Thats for now. .good luck matey
zontar
Visit this Community
Hawaii, United States
Joined: August 27, 2006
KitMaker: 1,646 posts
Armorama: 1,557 posts
Posted: Tuesday, October 11, 2016 - 03:33 AM UTC
Sil: might also try a high end fabric or sewing store. When I bought my mat, most of the other pink stuff seemed geared toward sewing.

your update looks great!
Zon
wedgetail53
Visit this Community
Queensland, Australia
Joined: October 02, 2008
KitMaker: 658 posts
Armorama: 629 posts
Posted: Tuesday, October 11, 2016 - 08:25 AM UTC
G'day fellas

No, I haven't given up or gone to sleep on the job. Assembling all 17 (!) figures was a pain in the butt, but they're finally done. I have also painted the beast, and had to do a bit of research to find how X2 was painted.

The pictures from Iserlohn weren't particularly clear as to whether or not X2 was painted in three colour camo. However, I found another picture on Tiger Im Focus which clearly shows three colour camo.



From this photo, the camo is obvious. Another photo showed X2 from a front three quarter view, and it would appear that the main colour was green. Jentz and Doyle stated that there was a direction issued, I think in late 1944 to the effect that the base colour for German vehicles was to be dark green, to be introduced progressively up until June 1945. Perhaps X2 was an early adherent to this requirement.

The two photos show how I've painted X2 so far. No weathering as yet.





In case anybody's wondering, the different colours were masked with Panzer Putty. I've had a tin of this stuff for a couple of years and never used it before, but it's very good!

And now the figures:



Next four, not yet weathered.



Note that the figure on the right is wearing a camo uniform. This is Italian camo cloth, which was issued to Panzer crews towards the end of the war. The photo below clearly show one of the surrendering crew members wearing such a uniform.



Third group.



Note the man wearing glasses - they're clearly visible in the photo below (he's the man sitting on the gun barrel). The glasses are from an Aber set of straps, buckles etc and the lenses are Micro Crystal Clear.



Next group.



Last group which includes the two Americans riding on the back deck. The armless gent in the background is the driver, and we'll only be able to see his head.



The last photo is the commander, who is an oberleutnant. I know they can't be seen, but his epaulettes are correct!



The epaulettes, badges etc, including the Americans, are from Archer.

And now back to the workbench.

Regards

Rob