
Campaigns
Where Armorama group builds can be discussed, organized, and updates posted.
Where Armorama group builds can be discussed, organized, and updates posted.
Hosted by Darren Baker, Richard S.
Super Heavy Campaign

Jagdtiger46

Joined: October 26, 2011
KitMaker: 291 posts
Armorama: 256 posts

Posted: Monday, April 08, 2013 - 02:25 PM UTC
Continuing work on the rear of the hull, fuel tank has been cleaned up (more to do though), and the beginnings of the strap bracket made that actually held the thing in place. Additional welds also added to brackets that fuel tank was mounted to.


Zaaphod

Joined: March 26, 2013
KitMaker: 65 posts
Armorama: 63 posts

Posted: Monday, April 08, 2013 - 05:44 PM UTC
Oh yes, I remember doing these out of paper. So many wheels... Worst two weeks of my life..

Jagdtiger46

Joined: October 26, 2011
KitMaker: 291 posts
Armorama: 256 posts

Posted: Wednesday, April 10, 2013 - 02:05 PM UTC
Last test fit/tweak before I commence painting upper hull.


Jagdtiger46

Joined: October 26, 2011
KitMaker: 291 posts
Armorama: 256 posts

Posted: Wednesday, April 10, 2013 - 02:07 PM UTC
All wheel assembly mounting arms (save one that I've apparently "misplaced"), are now rigidly mounted to lower hull.


Jagdtiger46

Joined: October 26, 2011
KitMaker: 291 posts
Armorama: 256 posts

Posted: Wednesday, April 10, 2013 - 02:14 PM UTC
Center bottom track run is now welded together. (I'm considering not bothering with the upper runs, as nobody will ever be able to see them anyway.)


Jagdtiger46

Joined: October 26, 2011
KitMaker: 291 posts
Armorama: 256 posts

Posted: Wednesday, April 10, 2013 - 02:16 PM UTC
Work also continues on the little Russian,... well little compared to the Maus anyway.


ppawlak1

Joined: March 14, 2006
KitMaker: 1,973 posts
Armorama: 1,843 posts

Posted: Wednesday, April 10, 2013 - 05:50 PM UTC
Hey guys !
Goodwork by all
I just need to add the PE to the E100 engine deck.
Next step is the turret.
I'll sort out the sag on the workable tracks once painted.
Cheers,
Paul
Goodwork by all

I just need to add the PE to the E100 engine deck.
Next step is the turret.

I'll sort out the sag on the workable tracks once painted.
Cheers,
Paul

Jagdtiger46

Joined: October 26, 2011
KitMaker: 291 posts
Armorama: 256 posts

Posted: Wednesday, April 10, 2013 - 06:19 PM UTC
That's quite a monster, Paul.

PantherF

Joined: June 10, 2005
KitMaker: 6,188 posts
Armorama: 5,960 posts

Posted: Thursday, April 11, 2013 - 12:46 AM UTC
According to the tracking info I should get my T28/T95 kit today.
Besides the JEEP Campaign, this will be my priority build soon as I have been quite fond of the beast.
Paul P... that is coming along really nice!
~ Jeff
Besides the JEEP Campaign, this will be my priority build soon as I have been quite fond of the beast.
Paul P... that is coming along really nice!

~ Jeff

ppawlak1

Joined: March 14, 2006
KitMaker: 1,973 posts
Armorama: 1,843 posts

Posted: Thursday, April 11, 2013 - 08:46 AM UTC
Hey guys !
Here's an update :
The Turret is on. The Crewman is wondering what the hold up is in moving out
Cheers,
Paul
Here's an update :
The Turret is on. The Crewman is wondering what the hold up is in moving out



Cheers,
Paul

Zaaphod

Joined: March 26, 2013
KitMaker: 65 posts
Armorama: 63 posts

Posted: Thursday, April 11, 2013 - 10:19 AM UTC
Paul, that E-100 looks great!

Tiger_213

Joined: August 10, 2012
KitMaker: 1,510 posts
Armorama: 1,443 posts

Posted: Thursday, April 11, 2013 - 10:36 AM UTC
Looks nice Paul; I think the commanders legs are a bit out of scale, or he has a habit of running around in stilts.


ppawlak1

Joined: March 14, 2006
KitMaker: 1,973 posts
Armorama: 1,843 posts

Posted: Thursday, April 11, 2013 - 11:55 AM UTC
Perhaps you have very short legs


Tiger_213

Joined: August 10, 2012
KitMaker: 1,510 posts
Armorama: 1,443 posts

Posted: Thursday, April 11, 2013 - 12:01 PM UTC
Maybe it's just my fantastically accurate sense of scale.
Looking forward to seeing what paint scheme you go for.

Posted: Friday, April 12, 2013 - 04:27 AM UTC
Hi guys
looking superb fellas
,Paul the E100 looks a true super heavy mate,cant wait to see some paint on it.
As promised an update on the Tortoise

Don't chuckle at the upside down tracks
as I know where you all live



I've airbrushed Revell Aqua color 36165 Bronze Green over a
Tamiya NATO black pre shade,I lightened the B/G with a touch of light grey and airbrushed some highlights.
A coat of Klear then a pin wash of black enamel.
Some light dry brushing and fading with Mig Pig P036 Allied Green (fading).
I want to show the tank in good nick and pretty clean so I'm just going to do a light dusting of chalky soil from the south of England
I'll start the chipping later this week and finish the tracks and the zorst
More soon
Andy

looking superb fellas

As promised an update on the Tortoise
Don't chuckle at the upside down tracks





I've airbrushed Revell Aqua color 36165 Bronze Green over a
Tamiya NATO black pre shade,I lightened the B/G with a touch of light grey and airbrushed some highlights.
A coat of Klear then a pin wash of black enamel.
Some light dry brushing and fading with Mig Pig P036 Allied Green (fading).
I want to show the tank in good nick and pretty clean so I'm just going to do a light dusting of chalky soil from the south of England
I'll start the chipping later this week and finish the tracks and the zorst
More soon
Andy

PantherF

Joined: June 10, 2005
KitMaker: 6,188 posts
Armorama: 5,960 posts

Posted: Friday, April 12, 2013 - 06:58 AM UTC
Looks good Andy!
I will start shortly.
~ Jeff
I will start shortly.

~ Jeff

DazzaD

Joined: June 17, 2007
KitMaker: 235 posts
Armorama: 232 posts

Posted: Friday, April 12, 2013 - 11:27 AM UTC
Nice work guys!
E100 is looking very good Paul, very clean and the tracks will come up a treat when finished.
Fantastic paint job Andy love your work. The lighter tone in the lower half has come out perfect. With the washes and weathering it looks real!
I wish I could make my models look that good!
E100 is looking very good Paul, very clean and the tracks will come up a treat when finished.
Fantastic paint job Andy love your work. The lighter tone in the lower half has come out perfect. With the washes and weathering it looks real!
I wish I could make my models look that good!


DazzaD

Joined: June 17, 2007
KitMaker: 235 posts
Armorama: 232 posts

Posted: Friday, April 12, 2013 - 11:50 AM UTC
Better add the updates on mine, almost forgot!
Just had a new addition to the family (a little earlier than expected
) so I might call this one done for the meantime. I can't see me getting much time for a while unless they are little touch ups.
I will be watching this thread though, want to see what you guys come up with.
Slime and Grime

Rust wash and Rust streaking

Just had a new addition to the family (a little earlier than expected

I will be watching this thread though, want to see what you guys come up with.
Slime and Grime

Rust wash and Rust streaking


Jagdtiger46

Joined: October 26, 2011
KitMaker: 291 posts
Armorama: 256 posts

Posted: Friday, April 12, 2013 - 12:42 PM UTC
Paul: Figure looks excellent. I wish I could paint that well.
Andy: Nice looking Tortoise
DazzaD: That's rustier than my car!
Andy: Nice looking Tortoise
DazzaD: That's rustier than my car!

Jagdtiger46

Joined: October 26, 2011
KitMaker: 291 posts
Armorama: 256 posts

Posted: Friday, April 12, 2013 - 12:45 PM UTC
Well OK now, I found the errant piece for the road wheels, and begun the installation. (Time consuming pain in the neck.)


Jagdtiger46

Joined: October 26, 2011
KitMaker: 291 posts
Armorama: 256 posts

Posted: Friday, April 12, 2013 - 12:52 PM UTC
Had I been paying attention, the main angled plate in the upper hull is split on both sides for removal of panels beneath. Doing this "in situ", combined with too much enthusiasm, ended up with me gouging the heck out of the upper right deck.


Zaaphod

Joined: March 26, 2013
KitMaker: 65 posts
Armorama: 63 posts

Posted: Saturday, April 13, 2013 - 07:32 AM UTC
Allright... So, I scratch-build these two fellas. It's... exhaust pipe covers as seen in WoT. For anyone wondering what's the big whoop, since I am just a poor boy from the poor family, those are made of yoghurt lid, frame from PE parts and pretty much everything I could salvage from my Tiger I spare parts... Anyway, it is pretty much ready for painting. And since I hate that part, wish me luck.


DazzaD

Joined: June 17, 2007
KitMaker: 235 posts
Armorama: 232 posts

Posted: Saturday, April 13, 2013 - 12:50 PM UTC
Nice work on the scratch Zaaphod, good luck with the paint mate! What cammo you going for?
Maus is coming along very nicely Jagdtiger46 I never built the upper tracks on mine. I remember starting and realizing that no one will ever see them so the effort would be a total waste! (I'll blame it on that and not me being lazy!):)
Maus is coming along very nicely Jagdtiger46 I never built the upper tracks on mine. I remember starting and realizing that no one will ever see them so the effort would be a total waste! (I'll blame it on that and not me being lazy!):)

ltb073

Joined: March 08, 2010
KitMaker: 3,662 posts
Armorama: 3,078 posts

Posted: Sunday, April 14, 2013 - 12:10 AM UTC
Some really great looking builds turning up here
Andy I didn't notice the up sidedown spare tracks looks all good to me
DazzaD outstanding paint job dude can't wait to see it finished

Andy I didn't notice the up sidedown spare tracks looks all good to me

DazzaD outstanding paint job dude can't wait to see it finished


Zaaphod

Joined: March 26, 2013
KitMaker: 65 posts
Armorama: 63 posts

Posted: Sunday, April 14, 2013 - 02:15 AM UTC
Quoted Text
Nice work on the scratch Zaaphod, good luck with the paint mate! What cammo you going for?
There are two paint schemes in the kit. I think I'll go with three tone one. Dark Yellow, Green and Red brown...
![]() |